3/4 Speed Driver for Hubsmith Rear Hub
3/4 Speed Driver for Hubsmith Rear Hub
This is the optional Hubsmith driver that can be used to convert a standard 2 speed Hubsmith rear hub to multi-speed.
- Complete assembly, including bearing, pawls, pawl springs, axle sleeve and revised end caps.
- Only compatible with rear hub manufactured by Hubsmith, e.g., R015R, R016R, and R022R
- Instead of the cir-clip, this driver make use of casstte lock rings that are sold seprately.
- Depending on the types, thickness of cogs and spacers used, 3, or 4 individual cogs can be fitted.
- To make use of multiple cogs, other items such as shifter, chain, chian pusher will need to be modified.
- Manufactured by Hubsmith
- Compatible with 10T, 11T, and 12T cog sets. Please choose the matching end caps.
Require greasing before installation
Note: Due to change in "Lock Nut to Flange Distance", after installing the 3 speed free hub on existing wheel, please be sure to re-dish the wheel.
Note: This free hub body differs slightly from previous versions made by Hubsmith. The flange at the end of spline is eliminated order to accommodate the 10T cog. The length of splines have also increased slightly to accommodate additional cogs.
Previous Page